Product of remedial and preventive action that completely destroys all parasitic vegetation (moss, lichens, algae and fungi), which is then removed by rain or simple brushing, and prevents its rapid reappearance.

BASIC FEATURES

Suitable for all types of materials, it does not affect the materials where it is applied.

The product's active ingredients impregnate the material and limit proliferation

of mold, making it more difficult for parasitic plants to germinate.

Residual effect lasting from 1 to 3 years after application (depending on type

of the material and the report).

APPLICATIONS

Outdoors, on materials such as terracotta, slate, concrete, natural stone, asphalt, coatings, wood, composite or synthetic materials, glass, etc.

INSTRUCTIONS FOR USE

Substrate preparation: If the moss is very dense, brush before application. The product is ready to use, but can be diluted up to 1:2 in the case of preventive application. When applied preventively before painting, ANTI-M GUARD® 24 can be diluted in a ratio of 1 (volume of product) to 2 (volumes of water) and sprayed onto the substrate, prior to painting. Do not proceed with coloring until the substrate is completely dry. Shake the product well before use. Always do a preliminary test. Apply with a low pressure sprayer until the substrate is soaked. Leave it on for 10 to 15 days. Residues can be removed by brushing or with the help of nature (rain). However, if it rains within the first 48 hours after application, the product may dissolve and must be re-sprayed. Clean the equipment with water. To prevent the re-appearance of moss, it is recommended to protect the surface with ProtectGuard® or ImperGuard®.